Publications

PUBLICATIONS After 1999

Professor: Chih-Jen (Jackie) Sung

Click here for the complete list of publications before 1999.

RIGOROUSLY-REFERRED PUBLICATIONS:

  1. C. J. Sung, J. G. Li, G. Yu, and C. K. Law, ”Chemical Kinetics and Self-Ignition in A Model Supersonic Hydrogen-Air Combustor,” AIAA Journal 37 (2), 208-214 (1999).
  2. C. J. Sun, C. J. Sung, L. He, and C. K. Law, “Dynamics of Weakly-Stretched Flames: Quantitative Description and Extraction of Global Flame Parameters,” Combustion and Flame 118, 108-128 (1999).
  3. S. R. Yang, J. R. Zhao, C. J. Sung, and G. Yu, ”Multiplex CARS Measurements in Supersonic Hydrogen/Air Combustion,” Applied Physics B- Laser and Optics B 68, 257-265 (1999).
  4. H. Y. Shih, H. Bedir, J. S. T’ien, and C. J. Sung, “Computed Flammability Limits of Opposed-Jet H2/O2/CO2 Diffusion Flames at Low Pressure,” Journal of Propulsion and Power 15 (6), pp. 903-908 (1999).
  5. C. G. Fotache, Y. Tan, C. J. Sung, and C. K. Law, “Ignition of CO/H2/N2 versus heated air in counterflow: experimental and modeling results,” Combustion and Flame 120, 417-426 (2000).
  6. C. J. Sung, C. K. Law, and J.-Y. Chen, “Further Validation of an Augmented Reduced Mechanism for Methane Oxidation: Comparison of Global Parameters and Detailed Structure,” Combustion Science and Technology 156, 201-220 (2000).
  7. C. J. Sung, C. J. Sun, and C. K. Law, “Linear Stability Analysis of Inwardly-Propagating Spherical Flame,” Combustion Science and Technology Communications 1, 7-10 (2000).
  8. F. C. Frate, H. Bedir, C. J. Sung, and J. S. T’ien, “On Flammability Limits of Dry CO/O2 Opposed-Jet Diffusion Flames,” Proceedings of the Combustion Institute 28, 2047-2054 (2000).
  9. E. W. Christiansen, C. K. Law, and C. J. Sung, “The Role of Pulsating Instability and Global Lewis Number on the Flammability Limit of Lean Heptane/Air Flames,” Proceedings of the Combustion Institute 28, 807-814 (2000).
  10. C. J. Sung and C. K. Law, “Structural Sensitivity, Response, and Extinction of Diffusion and Premixed Flames in Oscillating Counterflow,” Combustion and Flame 123, 375-388 (2000).
  11. C. K. Law and C. J. Sung, “Structure, Aerodynamics, and Geometry of Premixed Flamelets,” Progress in Energy and Combustion Science, 26, 459-505 (2000).
  12. E. W. Christiansen, C. K. Law, and C. J. Sung, “Steady and Pulsating Propagation and Extinction of Rich Hydrogen/Air Flames at Elevated Pressures ,” Combustion and Flame 124, 35-49 (2001).
  13. C. J. Sung, C. K. Law, and J.-Y. Chen, “Augmented Reduced Mechanisms for NO Emission in Methane Oxidation,” Combustion and Flame 125, 906-919 (2001).
  14. S. D. Tse, D. L. Zhu, C. J. Sung, Y. Ju, and C. K. Law, “Microgravity Burner-Generated Spherical Diffusion Flames: Experiment and Computation,” Combustion and Flame 125, 1265-1278 (2001).
  15. C. J. Sung, Y. Huang, and J. A. Eng, “Effects of Reformer Gas Addition on the Laminar Flame Speeds and Flammability Limits of n-Butane and iso-Butane Flames,” Combustion and Flame 126, 1699-1713 (2001).
  16. G. Yu, J. G. Li, X. Y. Zhang, and L. H. Chen, and C. J. Sung, “Investigation of Kerosene Combustion Characteristics with Pilot Hydrogen in Model Supersonic Combustors,” Journal of Propulsion and Power 17 (6), 1263-1272 (2001).
  17. C. J. Sung, A. Makino, and C. K. Law, “On Stretch-Affected Pulsating Instability in Rich Hydrogen/Air Flames: Asymptotic Analysis and Computation,” Combustion and Flame 128, 422-434 (2002).
  18. G. Yu, X. Y. Zhang, B. Han, and L. H. Chen, and C. J. Sung, “Experimental Investigation on Hydrogen/Air Model Scramjet Combustors,” Combustion Science and Technology 174 (3), 1-27 (2002).
  19. Y. Huang, C. J. Sung, and J. A. Eng, “Effects of n-Butane Addition on Reformer Gas Combustion: Implications for the Potential of Using Reformer Gas for an Engine Cold-Start,” Proceedings of the Combustion Institute 29, 759-766 (2002).
  20. T. Hirasawa, C. J. Sung, Z. Yang, A. Joshi, H. Wang, and C. K. Law, ”Determination of Laminar Flame Speeds of Fuel Blends Using Digital Particle Image Velocimetry: Ethylene, n-Butane, and Toluene Flames,” Proceedings of the Combustion Institute 29, 1427-1434 (2002).
  21. D. M. Mosbacher, J. A. Wehrmeyer, R. W. Pitz, R. W., C. J. Sung, and J. L. Byrd, “Experimental and Numerical Investigation of Premixed Tubular Flames,” Proceedings of the Combustion Institute 29, 1479-1486 (2002).
  22. J. L. Rhatigan, C. J. Sung, J. S. T’ien, ”On Solid Trioxane Combustion in Stagnation Point Flows,” Proceedings of the Combustion Institute 29, 1645-1652 (2002).
  23. G. Yu, J. G. Li, X. Y. Zhang, L. H. Chen, and C. J. Sung, “Fuel Injection and Flame Stabilization in a Liquid Kerosene-Fueled Supersonic Combustor,” Journal of Propulsion and Power 19 (5), 885-893 (2003).
  24. C. K. Law, C. J. Sung, H. Wang, and T. F. Lu, ”Development of Comprehensive Detailed and Reduced Reaction Mechanisms for Combustion Modeling,” AIAA Journal 41 (9), 1629-1646 (2003).
  25. B. Han, C. J. Sung, and M. Nishioka, “Effects of Vitiated Air on Hydrogen Ignition in a High-Speed Laminar Mixing Layer,” Combustion Science and Technology 176 (3), 305-330 (2004).
  26. Y. Huang, C. J. Sung, and J. A. Eng, “Dilution Limits of n-Butane/Air Mixtures at Conditions Relevant to HCCI Combustion,” Combustion and Flame 136, 457-466 (2004).
  27. Y. Huang, C. J. Sung, and J. A. Eng, “Laminar Flame Speeds of Primary Reference Fuels and Reformer Gas Mixtures,” Combustion and Flame 139, 239-251 (2004).
  28. T. Hirasawa,C. J. Sung, Z. Yang, A. Joshi, and H. Wang, “Effect of Ferrocene Addition on Sooting Limits in Laminar Premixed Ethylene/Oxygen/Argon Flames,” Combustion and Flame 139, 288-299 (2004).
  29. B. Han, A. F. Ibarreta, C. J. Sung, and J. S. T’ien, “Experimental Low Stretch Gaseous Diffusion Flames in Buoyancy-Induced Flowfields,” Proceedings of the Combustion Institute 30, 527-535 (2005).
  30. G. A. Boyarko, C. J. Sung, and S. J. Schneider, “Catalyzed Combustion of Hydrogen-Oxygen in Platinum Tubes for Micro-Propulsion Applications,” Proceedings of the Combustion Institute 30, 2481-2488 (2005).
  31. G. Yu, J. G. Li, J. R. Zhao, L. J. Yue, X. Y. Chang, and C. J. Sung, “An Experimental Study of Kerosene Combustion in a Supersonic Model Combustor Using Effervescent Atomization,” Proceedings of the Combustion Institute 30, 2859-2866 (2005).
  32. A. F. Ibarreta, C. J. Sung, T. Hirasawa, and H. Wang, “Burning Velocity Measurements of Microgravity Spherical Sooting Premixed Flames Using Rainbow Schlieren Deflectometry,” Combustion and Flame 140, 93-102 (2005).
  33. H. D. Perkins and C. J. Sung, “Effects of Fuel Distribution on Detonation Tube Performance,” Journal of Propulsion and Power 21 (3), 539-545 (2005).
  34. Y. Huang, C. J. Sung, and J. A. Eng, “Effects of Secondary Air on Global Hydrocarbon Consumption Rates in Engine Exhaust Gas,” Combustion Science and Technology 177, 1917-1937 (2005).
  35. A. F. Ibarreta and C. J. Sung, “Flame Temperature and Location Measurements of Sooting Premixed Bunsen Flames by Rainbow Schlieren Deflectometry,” Applied Optics 44 (17), 3565-3575 (2005).
  36. J. R. Nanduri, C. J. Sung, and J. S. T’ien, “Structure and Dynamic Response of Radiative Diffusion Flames,” Combustion Theory and Modelling 9 (3), 515-548 (2005).
  37. X. Fan, G. Yu, J. G. Li, X. Y. Zhang, and C. J. Sung, “Investigation of Vaporized Kerosene Injection and Combustion in a Supersonic Model Combustor,” Journal of Propulsion and Power 22 (1), 103-110 (2006).
  38. G. Mittal and C. J. Sung, “Aerodynamics inside a Rapid Compression Machine,” Combustion and Flame 145, 160-180 (2006).
  39. A. F. Ibarreta and C. J. Sung, “Optimization of Jet-A Fuel Reforming for Aerospace Applications,” International Journal of Hydrogen Energy 31 (8), 1066-1078 (2006).
  40. S. J. Volchko, C. J. Sung, Y. Huang, and S. J. Schneider, “Catalytic Combustion of Rich Methane/Oxygen Mixtures for Micropropulsion Applications,” Journal of Propulsion and Power 22 (3), 684-693 (2006).
  41. G. Mittal, C. J. Sung, and R. A. Yetter, “Autoignition of H2/CO at Elevated Pressures in a Rapid Compression Machine,” International Journal of Chemical Kinetics 38, 516-529 (2006).
  42. G. Mittal and C. J. Sung, “A Rapid Compression Machine for Chemical Kinetics Studies at Elevated Pressures and Temperatures,” Combustion Science and Technology 179 (3), 497-530 (2007).
  43. G. Mittal, C. J. Sung, M. Fairweather, A. S. Tomlin, J. F. Griffiths, and K. J. Hughes, “Significance of the HO2+CO Reaction during the Combustion of CO+H2 Mixtures at High Pressures,” Proceedings of the Combustion Institute 31, 419-427 (2007).
  44. A. F. Ibarreta, C. J. Sung, and H. Wang, “Experimental Characterization of Premixed Spherical Ethylene/Air Flames under Sooting Conditions,” Proceedings of the Combustion Institute 31, 1047-1054 (2007).
  45. X. J. Fan, G. Yu, J. G. Li, X. N. Lu, X. Y. Zhang, and C. J. Sung, “Combustion and Ignition of Thermally Cracked Kerosene in Supersonic Model Combustors,” Journal of Propulsion and Power 23 (2), 317-324 (2007).
  46. K. Kumar, J. E. Freeh, C. J. Sung, and Y. Huang, “Laminar Flame Speeds of Preheated iso-Octane/O2/N2 and n-Heptane/O2/N2 Mixtures,” Journal of Propulsion and Power 23 (2), 428-436 (2007).
  47. B. Han, A. F. Ibarreta, C. J. Sung, and J. S. T’ien, “Structure of Low-Stretch Methane Non-Premixed Flames,” Combustion and Flame 149, 173-190 (2007).
  48. X. You, H. Wang, E. Goos, C. J. Sung, and S. J. Klippenstein, “Reaction Kinetics of CO+HO2?Products: Ab Initio Study and Master Equation Modeling,” Journal of Physical Chemistry A, Journal of Physical Chemistry A 111, 4031-4042 (2007).
  49. G. Mittal and C. J. Sung, “Autoignition of Toluene and Benzene at Elevated Pressures in a Rapid Compression Machine,” Combustion and Flame 150, 355-368 (2007).
  50. X. J. Fan, G. Yu, J. G. Li, L. J. Yue, X. Y. Zhang, and C. J. Sung, “Effects of Entry Conditions on Cracked Kerosene-Fueled Supersonic Combustor Performance,” Combustion Science and Technology 179 (10), 2199-2217 (2007).
  51. K. Kumar and C. J. Sung, “Laminar Flame Speeds and Extinction Limits of Preheated n-Decane/O2/N2 and n-Dodecane/O2/N2 Mixtures,” Combustion and Flame 151, 209-224 (2007).
  52. Y. Huang, C. J. Sung, and K. Kumar, “Ultra-Dilute Combustion of Primary Reference Fuels,” Combustion Science and Technology 179 (11), 2361-2379 (2007).
  53. K. Kumar, G. Mittal, C. J. Sung, and C. K. Law, “An Experimental Investigation on Ethylene/O2/Diluent Mixtures: Laminar Flame Speeds with Preheat and Ignition Delays at High Pressures,” Combustion and Flame 153, 343-354 (2008).
  54. C. J. Sung and C.K. Law “Fundamental Combustion Properties of H2/CO Mixtures: Ignition and Flame Propagation at Elevated Pressures,” Combustion Science and Technology 180 (6), 1097-1116 (2008).
  55. G. Mittal, M. P. Raju, and C. J. Sung, “Computational Fluid Dynamics Modeling of Hydrogen Ignition in a Rapid Compression Machine,” Combustion and Flame 155, 417-428 (2008).
  56. G. Mittal and C. J. Sung, “Homogeneous Charge Compression Ignition of Binary Fuel Blends,” Combustion and Flame 155, 431-439 (2008).
  57. G. Mittal, M. Chaos, C. J. Sung, and F. L. Dryer, “Dimethyl Ether Autoignition in a Rapid Compression Machine: Experiments and Chemical Kinetic Modeling,” Fuel Processing Technology 89 (12), 1244-1254 (2008).
  58. A. F. Mielke, K. A. Elam, and C. J. Sung, “Multi-Property Measurements at High Sampling Rates using Rayleigh Scattering,” AIAA Journal 47 (4), 850-862 (2009).
  59. K. Kamal, G. Mittal, and C. J. Sung, “Autoignition of n-Decane under Elevated Pressure and Low-to-Intermediate Temperature Conditions,” Combustion and Flame 156, 1278-1288 (2009).
  60. F. Q. Zhong, X. J. Fan, G. Yu, J. G. Li, and C. J. Sung, “Heat Transfer of Aviation Kerosene at Supercritical Conditions,” Journal of Thermophysics and Heat Transfer 23 (3), 543-550 (2009).
  61. G. Mittal and C. J. Sung, “Autoignition of Methylcyclohexane at Elevated Pressures,” Combustion and Flame 156, 1852-1855 (2009).
  62. C. A. Mento, C. J. Sung, A. F. Ibarreta, and S. J. Schneider, “Catalyzed Ignition of Methane/Hydrogen/Oxygen Mixtures in a Platinum Microtube for Microthruster Applications,” Journal of Propulsion and Power 25 (6), 1203-1210 (2009).
  63. X. J. Fan, F. Q. Zhong, G. Yu, J. G. Li, and C. J. Sung, “Catalytic Cracking and Heat Sink Capacity of Aviation Kerosene under Supercritical Conditions,” Journal of Propulsion and Power 25 (6), 1226-1232 (2009).
  64. F. Yang, C. K. Law, C. J. Sung, and H. Q. Zhang, “A Mechanistic Study of Soret Diffusion in Hydrogen–Air Flames,” Combustion and Flame 157, 192-200 (2010).
  65. K. Kamal and C. J. Sung, “An Experimental Study of the Autoignition Characteristics of Conventional Jet Fuel/Oxidizer Mixtures: Jet-A and JP-8,” Combustion and Flame 157, 676-685 (2010).
  66. G. Mittal, M. P. Raju, and C. J. Sung, “CFD Modeling of Two-Stage Ignition in a Rapid Compression Machine: Assessment of Zero-Dimensional Approach,” Combustion and Flame 157, 1316-1324 (2010).
  67. K. Kumar and C. J. Sung, “Flame Propagation and Extinction Characteristics of Neat Surrogate Fuel Components,” Energy and Fuels 24 (7), 3840-3849 (2010).
  68. K. E. Niemeyer, C. J. Sung, and M. P. Raju, Skeletal Mechanism Generation for Surrogate Fuels using Directed Relation Graph with Error Propagation and Sensitivity Analysis, Combustion and Flame 157 (9), 1760-1770 (2010).
  69. K. Kumar and C. J. Sung, “A Comparative Experimental Study of the Autoignition Characteristics of Alternative and Conventional Jet Fuel/Oxidizer Mixtures,” Fuel 89 (10), 2853-2863 (2010).
  70. K. B. Brady, C. J. Sung, and J. S. T’ien, “Ignition Propensity of Hydrogen/Air Mixtures Impinging on a Platinum Stagnation Surface,” International Journal of Hydrogen Energy 35 (20), 11412-11423 (2010).
  71. F. Q. Zhong, X. J. Fan, G. Yu, J. G. Li, and C. J. Sung, “Performance of Supersonic Model Combustors with Staged Injections of Supercritical Aviation Kerosene,Acta Mechanica Sinica 26 (5), 661-668 (2010).
  72. S. Dooley, S. H. Won, M. Chaos, J. Heyne, Y. Ju, F. L. Dryer, K. Kumar, C. J. Sung, H. Wang, M. A. Oehlschlaeger, R. J. Santoro, and T. A. Litzinger, “A Jet Fuel Surrogate Formulated By Real Fuel Properties,” Combustion and Flame 157 (12), 2333-2339 (2010).
  73. C. Allen, G. Mittal, C. J. Sung, E. Toulson, T. Lee, “An Aerosol Rapid Compression Machine for Studying Energetic-Nanoparticle-Enhanced Combustion of Liquid Fuels,” Proceedings of Combustion Institute 33 (2), 3367-3374 (2011).
  74. A. K. Das,K. Kumar, and C. J. Sung, “Laminar Flame Speeds of Moist Syngas Mixtures,” Combustion and Flame 158 (2), 345-353 (2011).
  75. K. Kumar, C. J. Sung, and X. Hui, “Laminar Flame Speeds and Extinction Limits of Conventional and Alternative Jet Fuels,” Fuel90 (3), 1004-1011 (2011).
  76. K. Kumar and C. J. Sung, “Autoignition of Methanol: Experiments and Computations,” International Journal of Chemical Kinetics 43 (4), 175-184 (2011).
  77. B. W. Weber, K. Kumar, Y. Zhang, and C. J. Sung, “Autoignition of n-Butanol at Elevated Pressure and Low to Intermediate Temperature,” Combustion and Flame 158 (5), 809-819 (2011).
  78. F. Q. Zhong, X. J. Fan, G. Yu, J. G. Li, and C. J. Sung, “Thermal Cracking and Heat Sink Capacity of Aviation Kerosene under Supercritical Conditions,” Journal of Thermophysics and Heat Transfer 25 (3), 450-456 (2011).
  79. K. E. Niemeyer and C. J. Sung,On the Importance of Graph Search Algorithms for DRGEP-based Mechanism Reduction Methods,” Combustion and Flame 158 (8), 1439-1443 (2011).
  80. C. Zhang, Q. H. Xu, Y. Z. Lin, J. Zhu, Y. X. Yuan, and C. J. Sung, “Experimental Characterization of Fuel-Air Mixing in a Multihole Tube,” Journal of Engineering for Gas Turbines and Power 134 (3), 034501 1-5 (2012).
  81. G. Mittal, M. P. Raju, and C. J. Sung, “Vortex Formation in a Rapid Compression Machine: Influence of Physical and Operating Parameters,” Fuel 94, 409-417 (2012).
  82. S. Dooley, S. H. Won, J. Heyne, T. Farouk, F. L. Dryer, Y. Ju, K. Kumar, X. Hui, C. J. Sung, H. Wang, M. A. Oehlschlaeger, R. J. Santoro, T. A. Litzinger, V. Iyer, T. Malewicki, and K. Brezinsky, “The Experimental Evaluation of a Methodology to Surrogate Fuel Formulation for the Emulation of Gas Phase Combustion Kinetic Phenomena by a Theory of Real Fuel Oxidation,” Combustion and Flame 159 (4), 1444-1466 (2012).
  83. A. K. Das, C. J. Sung, Y. Zhang, and G. Mittal, “Ignition Delay Study of Moist Hydrogen/Oxidizer Mixtures using a Rapid Compression Machine,” International Journal of Hydrogen Energy 37 (8), 6901-6911 (2012).
  84. Y. X. Xin, C. J. Sung, and C. K. Law, “A Comprehensive Evaluation of Soret Diffusion in Heptane–Air Flames,” Combustion and Flame 159 (7), 2345-2351 (2012).
  85. K. B. Brady, C. J. Sung, and J. S. T’ien, “Dispersion and Catalytic Ignition of Hydrogen Leaks within Enclosed Spaces,” International Journal of Hydrogen Energy 37 (13), 10405-10415 (2012).
  86. X. Hui, A. K. Das, K. Kumar, C. J. Sung, S. Dooley, and F. L. Dryer, “Laminar Flame Speeds and Extinction Stretch Rates of Selected Aromatic Hydrocarbons,” Fuel 97, 695-702 (2012).
  87. X. Hui, K. Kumar, C. J. Sung, T. Edwards, and D. Gardner, “Experimental Studies on the Combustion Characteristics of Alternative Jet Fuels,” Fuel 98, 176-182 (2012).
  88. M. Uddi, A. K. Das, and C. J. Sung, “Temperature Measurements in a Rapid Compression Machine using Mid-IR H2O Absorption Spectroscopy near 7.6 µm”, Applied Optics 51 (22), 5464-5476 (2012).
  89. T. Tsujimura, W. J. Pitz, F. R. Gillespie, H. J. Curran, B. W. Weber, Y. Zhang, and C. J. Sung, “Development of Isopentanol Reaction Mechanism Reproducing Auto-Ignition Character at High and Low Temperatures,” Energy and Fuels 26 (8), 4871-4886 (2012).
  90. G. Kukkadapu, K. Kumar, C. J. Sung, M. Mehl, and W. J. Pitz, “Experimental and Surrogate Modeling Study of Gasoline Ignition in a Rapid Compression Machine,” Combustion and Flame 159 (10), 3066-3078 (2012).
  91. A. K. Das, M. Uddi, and C. J. Sung, “Two-Line Thermometry and H2O Measurement for Reactive Mixtures in Rapid Compression Machine nearb 7.6 µm”, Combustion and Flame 159 (12), 3493-3501 (2012).
  92. G. Kukkadapu, K. Kumar, C. J. Sung, M. Mehl, and W. J. Pitz, “Autoignition of Gasoline and its Surrogates in a Rapid Compression Machine,” Proceedings of Combustion Institute 34 (1), 345-352 (2013).
  93. B. W. Weber and C. J. Sung, “Comparative Autoignition Trends in the Butanol Isomers at Elevated Pressure,” Energy and Fuels 27 (3), 1688-1698 (2013).
  94. T. P. Bartkus, J. S. T’ien, and C. J. Sung, “A Semi-Global Reaction Rate Model Based on Experimental Data for the Self-Hydrolysis Kinetics of Aqueous Sodium Borohydride,” International Journal of Hydrogen Energy 38 (10), 4024-4033 (2013).
  95. F. Q. Zhong, L. H. Chen, F. Li, X. Y. Chang, and C. J. Sung, “Numerical Simulation of Ignition and Combustion of Ethylene in a Supersonic Model Combustor a Reduced Kinetic Mechanism,” Combustion Science and Technology 185 (4), 548-563 (2013).
  96. A. Kéromnès, W. K. Metcalfe, K. A. Heufer, N. Donohoe, A. K. Das, C. J. Sung, J. Herzler, C. Naumann, P. Griebel, O. Mathieu, M. C. Krejci, E. L. Petersen, W. J. Pitz, and H. J. Curran, “An Experimental and Detailed Chemical Kinetic Modelling Study of Hydrogen and Syngas Mixtures at Elevated Pressures,” Combustion and Flame 160 (6), 995-1011 (2013).
  97. X. Hui and C. J. Sung, “Laminar Flame Speeds of Transportation-Relevant Hydrocarbons and Jet Fuels at Elevated Temperatures and Pressures,” Fuel 109, 191-200 (July 2013).
  98. S. M. Sarathy, S. Park, B. W. Weber, W. Wang, P. S. Veloo, A. C. Davis, C. Togbe, C. K. Westbrook, O. Park, G. Dayma, Z. Luo, M. A. Oehlschlaeger, F. N. Egolfopoulos, T. Lu, W. J. Pitz, C. J. Sung, and P. Dagaut, “A Comprehensive Experimental and Modeling Study of Iso-Pentanol Combustion”, Combustion and Flame 160 (12), 2712-2728 (2013).
  99. K. E. Niemeyer and C. J. Sung, “Accelerating Moderately Stiff Chemical Kinetics in Reactive-Flow Simulations using GPUs,” Journal of Computational Physics 256, 854-871 (January 2014).
  100. K. E. Niemeyer and C. J. Sung, “Recent Progress and Challenges in Exploiting Graphics Processors in Computational Fluid Dynamics,” The Journal of Supercomputing 67 (2), 528-564 (February 2014).
  101. B. W. Weber, W. J. Pitz, M. Mehl, E. Silke, A. C. Davis, and C. J. Sung, “Experiments and Modeling of the Autoignition of Methylcyclohexane at High Pressure,” Combustion and Flame 161 (8), 1972-1983 (2014).
  102. C. J. Sung and H. J. Curran, “Using Rapid Compression Machines for Chemical Kinetics Studies,” Progress in Energy and Combustion Science 44, 1-18 (October 2014).
  103. X. Hui, C. Zhang, M. Xia, and C. J. Sung, “Effects of Hydrogen Addition on Combustion Characteristics of n-Decane/Air Mixtures,” Combustion and Flame 161 (9), 2252-2262 (2014).
  104. K. E. Niemeyer and C. J. Sung, “Mechanism Reduction for Multicomponent Surrogates: A Case Study using Toluene Reference Fuels,” Combustion and Flame 161 (11), 2752-2764 (2014).
  105. S. M. Sarathy, G. Kukkadapu, M. Mehl, W. Wang, T. Javed, S. Park, M. A. Oehlschlaeger, A. Farooq, W. J. Pitz, and C. J. Sung, “Ignition of Alkane-Rich FACE Gasoline Fuels and Surrogate Mixtures,” Proceedings of Combustion Institute 35 (1), 249-257 (2015).
  106. S. M. Burke, U. Burke, R. Mc Donagh, O. Mathieu, I. Osorio, C. Keesee, A. Morones, E. L. Petersen, W. Wang, T. A. DeVerter, M. A. Oehlschlaeger, B. Rhodes, R. K. Hanson, D. Davidson, B. W. Weber, C. J. Sung, J. Santner, Y. Ju, F. M. Haas, F. L. Dryer, E. N. Volkov, E. J. K. Nilsson, A. A. Konnov, M. Alrefae, F. Khaled, A. Farooq, P. Dirrenberger, O.-A. Glaude, F. Battin-Leclerc, and H. J. Curran, “An Experimental and Modeling Study of Propene Oxidation. Part 2: Ignition Delay Time and Flame Speed Measurements,” Combustion and Flame 162 (2), 296-214 (2015).
  107. N. J. Curtis, K. E. Niemeyer, and C. J. Sung, “An Automated Target Species Selection Method for Dynamic Adaptive Chemistry Simulations,” Combustion and Flame 162 (4), 1358-1374 (2015).
  108. K.E. Niemeyer and C. J. Sung. “Reduced Chemistry for a Gasoline Surrogate Valid at Engine-Relevant Conditions.” Energy & Fuels 29 (2), 1172-1185 (2015).
  109. G. Kukkadapu, K. Kumar, C. J. Sung, M. Mehl, and W. J. Pitz. “Autoignition of Gasoline Surrogates at Low Temperature Combustion Conditions.” Combustion and Flame 162 (5), 2272–2285 (2015).
  110. K. Kumar, Y. Zhang, C. J. Sung, and W. J. Pitz. “Autoignition Response of N-Butanol and Its Blends with Primary Reference Fuel Constituents of Gasoline.” Combustion and Flame 162 (6), 2466–2479 (2015).
  111. B. W. Weber, C. J. Sung, and M. W. Renfro. “On the Uncertainty of Temperature Estimation in a Rapid Compression Machine.” Combustion and Flame 162 (6) 2518–2528 (2015).
  112. F. Q. Zhong, S. G. Ma, X. Y. Zhang, C. J. Sung, and K. E. Niemeyer, “Development of Efficient and Accurate Skeletal Mechanisms for Hydrocarbon Fuels and Kerosene Surrogate,” Acta Mechanica Sinica 31 (5), 732-740 (October 2015).
  113. K. B. Brady, X. Hui, C. J. Sung, K. E. Niemeyer, “Counterflow Ignition of n-Butanol at Atmospheric and Elevated Pressures,” Combustion and Flame 162 (10), 3596-3611 (October 2015).
  114. O. Samimi Abianeh, M. A. Oehlschlaeger, and C. J. Sung, “A Surrogate Mixture and Kinetic Mechanism for Emulating the Evaporation and Autoignition Characteristics of Gasoline Fuel”, Combustion and Flame 162 (10), 3773-3784 (October 2015).
  115. G. Kukkadapu; B. W Weber, and C. J. Sung, “Autoignition Study of Tetralin in a Rapid Compression Machine at Elevated Pressures and Low-to-Intermediate Temperatures,” Fuel 159, 436-445 (November 2015).
  116. K. B. Brady, X. Hui, and C. J. Sung, “Effect of Hydrogen Addition on the Counterflow Ignition of n-Butanol at Atmospheric and Elevated Pressures,” International Journal of Hydrogen Energy 40 (46), 16618-16633 (December 2015).
  117. X. Hui, C. Zhang, Y. Z. Lin, and C. J. Sung, “Development in Studies of Alternative Jet Fuel Combustion: Progress, Challenges, and Opportunities,” Renewable and Sustainable Energy Reviews 54, 120-138 (February 2016).
  118. P. Singh, X. Hui, and C. J. Sung, “Soot Formation in Non-Premixed Counterflow Flames of Butane and Butanol Isomers,” Combustion and Flame 164, 167-182 (February 2016).
  119. K. B. Brady, X. Hui, and C. J. Sung, “Comparative Study of the Counterflow Forced Ignition of the Butanol Isomers at Atmospheric and Elevated Pressures,” Combustion and Flame 165, 34-49 (March 2016).
  120. G. Kukkadapu and C. J. Sung, “Autoignition Study of ULSD#2 and FD9A Diesel Blends,” Combustion and Flame 166, 45-54 (April 2016).
  121. C. W. Zhou, Y. Li, E. O’Connor, K. P. Somers, S. Thion, C. Keesee, O. Mathiue, E. L. Petersen, T. A. DeVerter, M. A. Oehlschlaeger, G. Kukkadapu, C. J. Sung, M. Alrefae, F. Khaled, A. Farooq, P. Dirrenberger, P. A. Glaude, F. Battin-Leclerc, J. Santner, Y. Ju, T, Held, F. M. Haas, F. L. Dryer, and H. J. Curran, “A Comprehensive Experimental and Modeling Study of Isobutene Oxidation,” Combustion and Flame 167, 353_379 (May 2016).
  122. E. E. Dames, A. S. Rosen, B. W. Weber, C. W. Gao, C. J. Sung, and W. H Green, “A Detailed Combined Experimental and Theoretical Study on Dimethyl Either/Propane Blended Oxidation,” Combustion and Flame 168, 310-330 (June 2016).
  123. S. M. Sarathy, G. Kukkadapu, M. Mehl, T. Javed, A. Ahmed, S. Park, M. Al Rashidi, W. L. Roberts, M. A. Oehlschlaeger, C. J. Sung, and A. Farooq, “Compositional Effects on the Ignition of FACE Gasoline Fuels,”Combustion and Flame 169, 171-193 (July 2016).
  124. P. Singh and C. J. Sung, “PAH Formation in Counterflow Non-Premixed Flames of Butane and Butanol Isomers,” Combustion and Flame 170, 91-110 (August 2016).
  125. K. Kumar and C. J. Sung, “Autoignition of Methyl Butanoate Under Engine Relevant Conditions,”Combustion and Flame 171, 1-14 (September 2016).
  126. O. Samimi Abianeh, N. J. Curtis, and C. J. Sung, “Determination of Modeled Luminosity-Based and Pressure-Based Ignition Delay Times of Turbulent Spray Combustion,” International Journal of Heat and Mass Transfer 103, 1297–1312 (December 2016).
  127. G. Kukkadapu and C. J. Sung, “Autoignition study of 1-Methylnaphthalene in a Rapid Compression Machine,” Energy and Fuels 31 (1), 854-866 (January 2017).
  128. X. Hui, K. E. Niemeyer, K. B. Brady, and C. J. Sung, “Reduced Chemistry for Butanol Isomers at Engine-Relevant Conditions,” Energy and Fuels 31 (1), 867-881 (January 2017).
  129. N. Atef, G. Kukkadapu, S. Y. Mohamed, M. Al Rachidi, C. Banyon, M. Mehl, A. Heufer, E. F. Nasir, A. Alfazazi, A. K Das, C. K. Westbrook, W. J. Pitz, T. Lu, A. Farooq, C. J. Sung; H. J. Curran; and S. M. Sarathy, “A Comprehensive iso-Octane Combustion Model with Improved Thermochemistry and Chemical Kinetics.” Combustion and Flame 178, 111-134 (April 2017).
  130. N. J. Curtis, K. E. Niemeyer, and C. J. Sung, “An Investigation of GPU-Based Stiff Chemical Kinetics Integration Methods,”Combustion and Flame 179, 312-324 (May 2017).
  131. K. E. Niemeyer, N. J. Curtis, and C. J. Sung, “pyJac: Analytical Jacobian Generator for Chemical Kinetics,” Computer Physics Communications 215, 188-203 (June 2017).
  132. J. Hartwig, G. Mittal, K. Kumar, and C. J. Sung, “Acetone Photophysics at 282 nm Excitation at Elevated Pressure and Temperature. I. Absorption and Fluorescence Experiments,” Applied Physics B 123 (6), 191 (June 2017).
  133. J. Hartwig, M. Raju, and C. J. Sung, “Acetone Photophysics at 282 nm Excitation at Elevated Pressure and Temperature. II. Fluorescence Modeling,” Applied Physics B 123 (7), 193 (July 2017).
  134. Z. Peng, T. Megaritis, C. J. Sung, M. Yaga, P. Hellier, and G. Tian, “Advanced Engine Flows and Combustion,” Journal of Combustion, 9285097 (August 2017).
  135. S. S. Goldsborough, S. Hochgreb, G. Vanhove, M. S. Wooldridge, H. J. Curran, and C. J. Sung, “Advances in Rapid Compression Machine Studies of Low- and Intermediate-Temperature Autoignition Phenomena,” Progress in Energy and Combustion Science 63, 1-78 (November 2017).
  136. G. Kukkadapu and C. J. Sung, “Autoignition of Binary Blends of n-Dodecane/1-Methylnaphthalene and iso-Cetane/1-Methylnaphthalene,” Combustion and Flame, in press.
  137. X. Xue, X. Hui, P. Singh, and C. J. Sung, “Soot Formation in Non-Premixed Counterflow Flames of Conventional and Alternative Jet Fuels,” Fuel, in press.

Back to Top

BOOK CHAPTERS:

  1. C. J. Sung, “Propagation of Counterflow Premixed Flames,” Combustion Phenomena: Selected Mechanisms of Flame Formation, Propagation, and Extinction (Eds.: J. Jarosinski and B. Veyssiere), Taylor and Francis CRC Press, pp. 35-45, 2009.
  2. C. J. Sung, “Extinction of Counterflow Premixed Flames,” Combustion Phenomena: Selected Mechanisms of Flame Formation, Propagation, and Extinction (Eds.: J. Jarosinski and B. Veyssiere), Taylor and Francis CRC Press, pp. 118-127, 2009.
  3. K. E. Niemeyer and C. J. Sung, “GPU-Based Parallel Integration of Large Numbers of Independent ODE Systems,” Numerical Computations with GPUs (Ed.: V. Kindratenko), Springer, in press.

CONTRIBUTED AND MODERATELY-REFERRED PUBLICATIONS:

  1. E. W. Christiansen, C. J. Sung, and C. K. Law, ”Steady and Pulsating Propagation and Extinction of Rich Hydrogen/Air Flames at elevated Pressures,” Thirty-Seventh Aerospace Sciences Meeting, AIAA Paper No. 99-0205 (1999).
  2. D. L. Zhu, C. J. Sung, and C. K. Law, ”Soot Formation in Fluctuating Flows,” Thirty-Seventh Aerospace Sciences Meeting, AIAA Paper No. 99-0451 (1999).
  3. S. D. Tse, D. L. Zhu, C. J. Sung, and C. K. Law, ”Microgravity Burner-Generated Spherical Diffusion Flames: Experiment and Computation,” Thirty-Seventh Aerospace Sciences Meeting, AIAA Paper No. 99-0585 (1999).
  4. C. J. Sung, C. K. Law, and J.-Y. Chen, ”An Augmented Reduced Mechanism for Methane Oxidation with Global Parametric and Detailed Structure Validation,” First Joint Meeting of the U.S. Sections of the Combustion Institute, Washington DC, 1999.
  5. C. J. Sung, C. J. Sun, and C. K. Law, ”On Curvature-Affected Pulsating Instability in Inwardly-Propagating Spherical Flame,” First Joint Meeting of the U.S. Sections of the Combustion Institute, Washington DC, 1999.
  6. C. K. Law, S. D. Tse, L. He, D. L. Zhu, and C. J. Sung, ” Structure and Transient Response of Spherical Flames,” Fifth International Microgravity Combustion Workshop, Cleveland, OH, 1999.
  7. F. C. Frate, H. Bedir, C. J. Sung, and J. S. T’ien, “A Computational Study of Dry CO/O2 Opposed-Jet Diffusion Flame and its Flammability Limits,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, Raleigh, NC, 1999.
  8. C. J. Sung and C. K. Law, ”Pulsating Instability in Rich Hydrogen/Air Counterflow Flames,” Thirty-Eighth Aerospace Sciences Meeting, AIAA Paper No. 2000-0577 (2000).
  9. C. K. Law, C. J. Sung, and H. Wang, ”On the Development of Detailed and Reduced Reaction Mechanisms for Combustion Modeling,” Thirty-Eighth Aerospace Sciences Meeting, AIAA Paper No. 2000-0860 (2000).
  10. Y. Huang, C. J. Sung, and J. A. Eng, “Extending Dilution Limit during Cold-Start by Reformer Gas Addition,” Technical Meeting of the Central States Section of the Combustion Institute, Indianapolis, IN, 2000.
  11. C. J. Sung, C. K. Law, and J.-Y. Chen, ”Augmented Reduced Mechanisms for NO Emission in Methane Oxidation,” Technical Meeting of the Central States Section of the Combustion Institute, Indianapolis, IN, 2000.
  12. G. Yu, J. G. Li, X. Y. Zhang, L. H. Cheng, and C. J. Sung, “Investigation on Combustion Characteristics of Kerosene-Hydrogen Dual Fuel in a Supersonic Combustor,” Thirty-Sixth AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2000-3620 (2000).
  13. C. J. Sung, C. K. Law, and J.-Y. Chen, ”Augmented Reduced Mechanisms for Combustion Modeling,” American Flame Research Committee (AFRC) International Symposium, Newport Beach, CA, 2000.
  14. J. L. Rhatigan, C. J. Sung, J. S. T’ien, ”A Computational Study of Solid Trioxane Combustion in Stagnation-Point Flows,” Thirty-Ninth Aerospace Sciences Meeting, AIAA Paper No. 2001-0470 (2001).
  15. J. A. Wehrmeyer, R. J. Osborne, D. M. Mosbacher, Z. Cheng, R. W. Pitz, and C. J. Sung, ”Investigation of Partially Premixed Propane-Air Flames with Flame Curvature,” Thirty-Ninth Aerospace Sciences Meeting, AIAA Paper No. 2001-1083 (2001).
  16. T. Hirasawa, C. J. Sung, Z. Yang, H. Wang, and C. K. Law, ”Determination of Laminar Flame Speeds of Ethylene/n-Butane/Air Flames Using Digital Particle Image Velocimetry,” Second Joint Meeting of the U.S. Sections of the Combustion Institute, Oakland, CA, 2001.
  17. D. M. Mosbacher, J. A. Wehrmeyer, R. J. Osborne, Z. Cheng, R. W. Pitz, and C. J. Sung, ”Investigation of Partially Premixed Cylindrical and Planar Opposed Jet Propane-Air Flames,” Second Joint Meeting of the U.S. Sections of the Combustion Institute, Oakland, CA, 2001.
  18. C. J. Sung, A. Makino, and C. K. Law, ”On Stretch-Affected Pulsating Instability in Rich Hydrogen/Air Flames: Asymptotic Analysis and Computation,” Second Joint Meeting of the U.S. Sections of the Combustion Institute, Oakland, CA, 2001.
  19. C. J. Sung and H. Wang, ”Laminar Flame Speeds of Soot-Forming Flames,” Sixth International Microgravity Combustion Workshop, Cleveland, OH, 2001.
  20. B. Han, C. J. Sung, and M. Nishioka, “Effects of Vitiated Air on Ignition in the Supersonic Hydrogen/Air Laminar Mixing Layer,” Third Asia-Pacific International Symposium on Combustion, Seoul, Korea, 2001.
  21. G. Yu, J. G. Li, X. Y. Zhang, L. H. Cheng, and C. J. Sung, “Investigation of Fuel Injection and Flame Stabilization in Liquid Hydrocarbon-Fueled Supersonic Combustors,” Thirty-Seventh AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2001-3608 (2001).
  22. R. W. Pitz, D. M. Mosbacher, J. A. Wehrmeyer, R. J. Osborne, Z. Cheng, C. J. Sung, and J. L. Byrd, “Raman Scattering Measurements of Low Temperature Planar and Tubular Flames: Implications for Modeling,” NSF-Italy Workshop on “New Models with Practical Fuels,” S. Margherita Ligure, Italy, 2001.
  23. K. Ikeda, M. Nishioka, and C. J. Sung, “The Effect of NO Addition on Ignition in the Supersonic Hydrogen/Air Laminar Mixing Layer,” Thirty-Ninth Symposium on Combustion (Japanese Section), 2001.
  24. C. K. Law, C. J. Sung, and H. Wang, “On the Development of Detailed and Reduced Chemical Reaction Mechanisms for Aeropropulsion Modeling,” Fortieth Aerospace Sciences Meeting, AIAA Paper No. 2002-0331 (2002).
  25. B. Han, C. J. Sung, and M. Nishioka, “Effects of Vitiated Air on Hydrogen Ignition in the Supersonic Mixing Layer,” Fortieth Aerospace Sciences Meeting, AIAA Paper No. 2002-0332 (2002).
  26. D. M. Mosbacher, J. A. Wehrmeyer, R. W. Pitz,, and C. J. Sung, “Experimental and Numerical Investigation of Premixed Cylindrical Flames,” Fortieth Aerospace Sciences Meeting, AIAA Paper No. 2002-0481 (2002).
  27. T. Hirasawa, H. Wang, H. -M. Wang, and C. J. Sung, “Effect OF Ferrocene Addition on Sooting Limits in Ethylene/Oxygen/Argon Premixed Flames,” Fortieth Aerospace Sciences Meeting, AIAA Paper No. 2002-0619 (2002).
  28. B. Han, C. J. Sung, and M. Nishioka, “A Numerical Study of Vitiation Effects on Ignition in Two-Dimensional Supersonic Hydrogen/Air Mixing Layer,” Technical Meeting of the Central States Section of the Combustion Institute, Knoxville, TN, 2002.
  29. J. R. Nanduri, C. J. Sung and J. S. T’ien, “Dynamics of Radiative Edge Diffusion Flames,” Technical Meeting of the Central States Section of the Combustion Institute, Knoxville, TN, 2002.
  30. Y. Huang, C. J. Sung, and J. A. Eng, “Effects of n-Butane Addition on Reformer Gas Combustion,” Technical Meeting of the Central States Section of the Combustion Institute, Knoxville, TN, 2002.
  31. G. Yu, J. G. Li, S. R. Yang, L. J. Yue, X. Y. Zhang, Y. Huang, and C. J. Sung, “Investigation of Liquid Hydrocarbon Combustion in Supersonic Flows Using Effervescent Atomization,” Thirty-Eighth AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2002-4279 (2002).
  32. J. S. T’ien and C. J. Sung, “Computation and Modeling of Flammability Limits and Flame Suppression,” Second National Research Institute of Fire and Disaster Symposium, Tokyo , Japan , 2002.
  33. G. Yu, J. G. Li, L. J. Yue, J. R. Zhao, X. Y. Zhang Y. Huang, and C. J. Sung, ” Characterization of Kerosene Combustion in Supersonic Flow Using Effervescent Atomization,” Eleventh AIAA/AAAF International Conference Space Planes and Hypersonic Systems and Technologies, AIAA Paper No. 2002-5225 (2002).
  34. S. J. Schneider, G. A. Boyarko, and C. J. Sung, “Catalyzed Ignition of Bipropellants in Microtubes,” Forty-First Aerospace Sciences Meeting, AIAA Paper No. 2003-0674 (2003).
  35. J. R. Nanduri, C. J. Sung and J. S. T’ien, “On Radiative Edge Diffusion Flames,” Sixth ASME/JSME Thermal Engineering Joint Conference, Hawaii Island, Hawaii, 2003.
  36. A. F. Ibarreta and C. J. Sung, “Determination of Flame Location Using Rainbow Schlieren Deflectometry,” Third Joint Meeting of the U.S. Sections of the Combustion Institute, Chicago, IL, 2003.
  37. B. Han, A. F. Ibarreta, C. J. Sung, and J. S. T’ien, “On Burner-Generated Low-Stretch Diffusion Flames in Natural-Convective Flows,” Third Joint Meeting of the U.S. Sections of the Combustion Institute, Chicago, IL, 2003.
  38. J. R. Nanduri, C. J. Sung and J. S. T’ien, “On Diffusional-Thermal Instability of Radiative Diffusion Flames: Initial Profile Dependence,” Third Joint Meeting of the U.S. Sections of the Combustion Institute, Chicago, IL, 2003.
  39. Y. Huang, C. J. Sung, and J. A. Eng,, “Dilution Limits of n-Butane/Air Mixtures at Conditions Relevant to HCCI Combustion,” Third Joint Meeting of the U.S. Sections of the Combustion Institute, Chicago, IL, 2003.
  40. Y. Huang, C. J. Sung, and J. A. Eng,, “Laminar Flame Speeds of Primary Reference Fuels and Reformer Gas Mixtures,” Third Joint Meeting of the U.S. Sections of the Combustion Institute, Chicago, IL, 2003.
  41. H. Wang and C. J. Sung, “Experiments and Modeling of Soot Formation in Laminar Premixed Flames: Detailed Particle Size Distribution Function, Effect of Ferrocene Addition, and Role of Ion in Soot Mass Growth,” Seventh International Microgravity Combustion Workshop, Cleveland , OH , 2003.
  42. C. J. Sung and S. J. Schneider, “Catalyzed Combustion in Micro-Propulsion Devices – Project Status,” Seventh International Microgravity Combustion Workshop, Cleveland , OH , 2003.
  43. S. J. Schneider, C. J. Sung, and G. A. Boyarko, “Catalyzed Combustion of Bipropellants for Micro-Spacecraft Propulsion,” Thirty-Ninth AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2003-4924 (2003).
  44. H. D. Perkins and C. J. Sung, “Effects of Non-Uniform Fuel Distribution on Detonation Tube Performance,” Sixteenth International Symposium on Air Breathing Engines, ISABE-2003-1237, Cleveland, OH, 2003.
  45. Y. Huang, C. J. Sung, and J. A. Eng, “Laminar Flame Speeds of Primary Reference Fuels”, Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University Park, PA, 2003.
  46. J. R. Nanduri, C. J. Sung, and J. S. T’ien, “On Low-Stretch Sub-limit Hydrogen Combustion,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University Park, PA, 2003.
  47. B. Han, A. F. Ibarreta, C. J. Sung, and J. S. T’ien, “Experimental Diagnostics on Buoyancy-Induced Low Stretch Gaseous Diffusion Flames,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University Park, PA, 2003.
  48. Y. Huang, C. J. Sung, and J. A. Eng, “Determination of Laminar Flame Speeds of Primary Reference Fuel Blends and Reformer Gas Mixtures using Digital Particle Image Velocimetry,” Forty-Second Aerospace Sciences Meeting, AIAA Paper No. 2004-0143 (2004).
  49. B. Han, A. F. Ibarreta, C. J. Sung, and J. S. T’ien, “An Experimental Study on Buoyancy-Induced Low Stretch Gaseous Diffusion Flames,” Forty-Second Aerospace Sciences Meeting, AIAA Paper No. 2004-0147 (2004).
  50. G. A. Boyarko, C. J. Sung, and S. J. Schneider, “Catalyzed Combustion of Hydrogen-Oxygen in Platinum Tubes for Micro-Propulsion Applications,” Forty-Second Aerospace Sciences Meeting, AIAA Paper No. 2004-0303 (2004).
  51. A. F. Ibarreta, C. J. Sung, T. Hirasawa, and H. Wang, “Burning Velocity Measurements of Sooting Premixed Flames,” Forty-Second Aerospace Sciences Meeting, AIAA Paper No. 2004-0953 (2004).
  52. G. Mittal and C. J. Sung, “A Rapid Compression Machine for Chemical Kinetics Studies at Elevated Temperature and Pressure,” Technical Meeting of the Central States Section of the Combustion Institute, San Antonio, TX, 2004.
  53. X. J. Fan, G. Yu, J. G. Li and X. Y. Zhang, and C. J. Sung, “Performance of a Supersonic Model Combustor using Vaporized Kerosene Injection,” Forty AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2004-3485 (2004).
  54. J. E. Freeh, K. Kumar, Y. Huang, and C. J. Sung, “Laminar Flame Speeds of Preheated iso-Octane/Air and n-Decane/Air Flames Using Digital Particle Image Velocimetry,” Forty AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2004-3709 (2004).
  55. A. F. Ibarreta, C. J. Sung, and H. Wang, “Burning Velocities of Sooting Premixed Ethylene/Air Flames,” Forth Joint Meeting of the U.S. Sections of the Combustion Institute, Philadelphia, PA, 2005.
  56. B. Han, A. F. Ibarreta, C. J. Sung, and J. S. T’ien, “Structure of Low-Stretch Methane Diffusion Flames,” Forth Joint Meeting of the U.S. Sections of the Combustion Institute, Philadelphia, PA, 2005.
  57. G. Mittal and C. J. Sung, “Aerodynamics inside a Rapid Compression Machine,” Forth Joint Meeting of the U.S. Sections of the Combustion Institute, Philadelphia, PA, 2005.
  58. K. Kumar, Y. Huang, and C. J. Sung, “Laminar Flame Speeds of Preheated n-Decane/Air and n-Dodecane/Air Mixtures,” Forth Joint Meeting of the U.S. Sections of the Combustion Institute, Philadelphia, PA, 2005.
  59. X. J. Fan, G. Yu, J. G. Li, L. J. Yue, X. Y. Zhang, and C. J. Sung, “Characterization of a Supersonic Model Combustor with Partially-Cracked Kerosene,” Forty-First AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2005-3714 (2005).
  60. S. J. Volchko, C. J. Sung, and S. J. Schneider, “Catalytic Combustion of Methane/Oxygen Mixtures for Micropropulsion Applications,” Forty-First AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2005-3924, 2005.
  61. A. F. Mielke, K. A. Elam, and C. J. Sung, Rayleigh Scattering Diagnostic for Measurement of Temperature, Velocity, and Density Fluctuation Spectra, Forty-Four Aerospace Sciences Meeting, AIAA Paper No. 20046-0837 (2006).
  62. C. A. Mento, C. J. Sung, A. F. Ibarreta, and S. J. Schneider, Effect of Hydrogen Addition on Catalytic Ignition of Rich Methane/Oxygen Mixtures in a Platinum Microtube, Technical Meeting of the Central States Section of the Combustion Institute, Cleveland, OH, 2006.
  63. K. Kumar, G. Mittal, C. J. Sung, and C. K. Law, An Experimental and Kinetics Investigation on Ethylene/O2/Diluent Mixtures: Laminar Flame Speeds with Preheat and Ignition Delays at High Pressures, Technical Meeting of the Central States Section of the Combustion Institute, Cleveland, OH, 2006.
  64. K. Kumar and C. J. Sung, Laminar Flame speeds and Extinction Limits of Preheated n-Decane/O2/N2 and n-Dodecane/O2/N2 Mixtures, Technical Meeting of the Central States Section of the Combustion Institute, Cleveland, OH, 2006.
  65. J. Nowakowski and C. J. Sung, Integration of Predicted Jet Length and Temperature Profiles for a Variable Heat Pattern Injector, Technical Meeting of the Central States Section of the Combustion Institute, Cleveland, OH, 2006.
  66. G. Mittal and C. J. Sung, Autoignition of Toluene at Elevated Pressures in a Rapid Compression Machine, Technical Meeting of the Central States Section of the Combustion Institute, Cleveland, OH, 2006.
  67. G. Mittal and C. J. Sung, Experimental Investigation of Autoignition of Toluene-Isooctane Blends, Technical Meeting of the Central States Section of the Combustion Institute, Cleveland, OH, 2006.
  68. A. F. Mielke, K. A. Elam, and C. J. Sung, “Molecular Rayleigh Scattering Diagnostic for Dynamic Temperature, Velocity, and Density Measurements,” Twenty-Fifth AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA Paper No. 2006-2969 (2006).
  69. G. Yu, X. J. Fan, J. G. Li, L. J. Yue, X. Y. Zhang, and C. J. Sung, “Experimental Study on Combustion of Thermally-Cracked Kerosene in Model Supersonic Combustors,” Forty-Second AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2006-4514 (2006).
  70. X. J. Fan, G. Yu, J. G. Li, X. N. Lu, and C. J. Sung, “Catalytic Cracking of Supercritical Aviation Kerosene,” Forty-Second AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2006-4868 (2006).
  71. C. A. Mento, C. J. Sung, A. F. Ibarreta, and S. J. Schneider, “Catalytic Ignition of Methane/Hydrogen/Oxygen Mixtures for Microthruster Applications,” Forty-Second AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2006-4871 (2006).
  72. K. Kumar, G. Mittal, and C. J. Sung, “Autoignition of n-Decane under High Pressure Conditions,” Fifth Joint Meeting of the U.S. Sections of the Combustion Institute, San Diego, CA, 2007.
  73. K. Kumar, G. Mittal, C. J. Sung, and C. K. Law, “An Experimental Investigation on Ethylene/Oxygen/Diluent Mixtures: Laminar Flame Speeds with Preheat and Ignition Delays at High Pressures,” Fifth Joint Meeting of the U.S. Sections of the Combustion Institute, San Diego, CA, 2007.
  74. G. Mittal and C. J. Sung, “Homogeneous Charge Compression Ignition of Binary Blends Relevant to Gasoline Surrogates,” Fifth Joint Meeting of the U.S. Sections of the Combustion Institute, San Diego, CA, 2007.
  75. G. Mittal and C. J. Sung, “Ignition of Moist Syngas in a Rapid Compression Machine,” Fifth Joint Meeting of the U.S. Sections of the Combustion Institute, San Diego, CA, 2007.
  76. X. You, H. Wang, E. Goos, C. J. Sung, and S. J. Klippenstein, “Reaction Kinetics of CO+HO2 ? Products: Ab Initio Study and Master Equation Modeling,” Fifth Joint Meeting of the U.S. Sections of the Combustion Institute, San Diego, CA, 2007.
  77. A. F. Mielke, K. A. Elam, and C. J. Sung, “Development of a Rayleigh Scattering Diagnostic for Time-Resolved Gas Flow Velocity, Temperature, and Density Measurements in Aerodynamic Test Facilities,” Twenty-Second International Congress on Instrumentation in Aerospace Simulation Facilities, Pacific Grove, CA, 2007.
  78. X. J. Fan, G. Yu, J. G. Li, and X. N. Lu, and C. J. Sung, “Performance of Supersonic Model Combustors with Distributed Injection of Supercritical Kerosene,” Forty-Third AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2007-5406 (2007).
  79. M. P. Raju, C. J. Sung, and K. P. Kundu, “Integrating Sensitivity Analysis into Directed Relation Graph with Error Propagation for Effective Chemical Mechanism Reduction,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Virginia, VA, 2007.
  80. M. P. Raju and C. J. Sung, “Optimization of Combustion Application Codes using Sparse Matrix Techniques,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Virginia, VA, 2007.
  81. G. Mittal, M. P. Raju, C. J. Sung, and K. P. Kundu, “A Computational Fluid Dynamics Study of a Rapid Compression Machine,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Virginia, VA, 2007.
  82. G. Mittal, M. Chaos, C. J. Sung, and F. L. Dryer, “A Rapid Compression Machine Study of Dimethyl Ether Autoignition,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Virginia, VA, 2007.
  83. A. F. Mielke, K. A. Elam, and C. J. Sung, “Time-Resolved Rayleigh Scattering Measurements in Hot Gas Flows,” Forty-Six Aerospace Sciences Meeting, AIAA Paper No. 2008-0262, 2008.
  84. K. Kumar and C. J. Sung, “An Experimental Study of the Autoignition Characteristics of Jet-A/Oxidizer Mixtures in a Rapid Compression Machine,” Spring Technical Meeting of the Western States Section of the Combustion Institute, University of Southern California, CA, 2008.
  85. X. Hui, A. K. Das, K. Kumar, C. J. Sung, S. Dooley, and F. L. Dryer, “Laminar Flame Speeds and Extinction Stretch Rates of Selected Aromatic Hydrocarbons,” Fuel 97, 695-702, 2012.
  86. G. Mittal and C. J. Sung, “An Experimental Study of Autoignition of Methylcyclohexane,” Technical Meeting of the Central States Section of the Combustion Institute, Tuscaloosa, AL, 2008.
  87. G. Mittal, M. P. Raju, and C. J. Sung, “Assessment of Zero-Dimensional Approach for Modeling Rapid Compression Machine Experiments,” Technical Meeting of the Central States Section of the Combustion Institute, Tuscaloosa, AL, 2008.
  88. F. Q. Zhong, X. J. Fan, G. Yu, J. G. Li, X. N. Lu, and C. J. Sung, “Heat Transfer of Aviation Kerosene at Supercritical Conditions,” Forty-Fourth AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2008-4615 (2008).
  89. X. J. Fan, F. Q. Zhong, G. Yu, J. G. Li, and C. J. Sung, “Catalytic Cracking of China No. 3 Aviation Kerosene under Supercritical Conditions,” Forty-Fourth AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2008-5130 (2008).
  90. K. Kumar and C. J. Sung, “Autoignition of Conventional and Alternative Jet Fuels,” Second International Symposium on Jet Propulsion and Power Engineering, Guilin, China, 2008.
  91. M. C. Deans, C. J. Sung, and S. J. Schneider, “A Computational Study of the Ignition of Premixed Methane and Oxygen via a Hot Stream,” Forty-Seventh Aerospace Sciences Meeting, AIAA Paper No. 2009-454 (2009).
  92. F. Yang, C. K. Law, C. J. Sung, and H. Q. Zhang, “A Mechanistic Study of Soret Diffusion in Hydrogen-Air Flames,” Forty-Seventh Aerospace Sciences Meeting, AIAA Paper No. 2009-988 (2009).
  93. K. Kamal, C. J. Sung, and X. Hui, “Laminar Flame Speeds and Extinction Limits of Conventional and Alternative Jet Fuels,” Forty-Seventh Aerospace Sciences Meeting, AIAA Paper No. 2009-991 (2009).
  94. K. Kamal and C. J. Sung, “Autoignition of Jet Fuels under High Pressure and Low-to-intermediate Temperatures,” Forty-Seventh Aerospace Sciences Meeting, AIAA Paper No. 2009-1527 (2009).
  95. K. Kamal and C. J. Sung, “Autoignition of Fully Blended Jet Fuels and Neat Hydrocarbons: Effect of Cetane Number,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  96. K. E. Niemeyer, M. P. Raju, and C. J. Sung, “Skeletal Mechanism Generation for Surrogate Fuels Using Directed Relation Graph with Error Propagation and Sensitivity Analysis,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  97. K. B. Brady, K. Kamal, C. J. Sung, and J. S. T’ien, “Ignition Propensity of Premixed H2/Air Mixtures in the Presence of a Platinum Surface,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  98. M. C. Deans, C. J. Sung, and S. J. Schneider, “Forced Ignition of Premixed Methane and Oxidizer via a Vitiated Hot Stream,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  99. K. Kamal, X. Hui, and C. J. Sung, “Fundamental Combustion Properties of Jet Fuels,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  100. K. Kamal and C. J. Sung, “Flame Propagation and Extinction Characteristics of Neat Hydrocarbon Surrogate Fuel Components,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  101. A. K. Das, K. Kamal, and C. J. Sung, “Laminar Flame Speeds of Moist Syngas Mixtures,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  102. F. Yang, C. K. Law, C. J. Sung, and H. Q. Zhang, “Soret Diffusion in Hydrogen–Air Flames,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  103. G. Mittal, M. P. Raju, and C. J. Sung, “Adequacy of Zero-Dimensional Approach for Modeling Two-Stage Ignition in Rapid Compression Machine Experiments,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  104. A. K. Das, C. J. Sung, and G. Mittal, “Ignition Delay Study of Moist Syngas Mixtures Using a Rapid Compression Machine,” Sixth Joint Meeting of the U.S. Sections of the Combustion Institute, Ann Arbor, MI, 2009.
  105. W. Gao, H. S. Liang, Q. H. Xu, Y. Z. Lin, and C. J. Sung, “Injection of Supercritical Aviation Kerosene into a Quiescent Atmospheric Environment,” Forty-Fifth AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2009-4927 (2009).
  106. F. Q. Zhong, X. J. Fan, J. Wang, G. Yu, J. G. Li, and C. J. Sung, “Thermal Cracking and Heat Sink Capacity of Aviation Kerosene under Supercritical Conditions,” Forty-Fifth AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2009-5267 (2009).
  107. K. E. Niemeyer, M. P. Raju, and C. J. Sung, “Skeletal Mechanism Generation of Surrogate Fuels Using Directed Relation Graph with Error Propagation and Sensitivity Analysis,” Forty-Fifth AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2009-5495 (2009).
  108. X. J. Fan, F. Q. Zhong, G. Yu, J. G. Li, and C. J. Sung, “Catalytic Cracking of Aviation Kerosene under Supercritical Conditions,” Third International Workshop on Non-Equilibrium Flows in conjunction with the Second International Symposium on Computational Mechanics (ISCM II), Paper No. ISCM2-279 (2009).
  109. C. J. Sung and K. E. Niemeyer, “Skeletal Mechanism Generation of Surrogate Jet Fuels for Aeropropulsion Modeling,” Third International Workshop on Non-Equilibrium Flows in conjunction with the Second International Symposium on Computational Mechanics (ISCM II), Paper No. ISCM2-513 (2009).
  110. S. Dooley, S. H. Won, M. Chaos, J. Heyne, Y. Ju, F. L. Dryer, K. Kamal, C. J. Sung, H. Wang, M. A. Oehlschlaeger, R. J. Santoro, and T. A. Litzinger, “A Jet Fuel Surrogate Formulated By Real Fuel Properties,” Technical Meeting of the Western States Section of the Combustion Institute, Boulder, Colorado, 2010.
  111. A. K. Das and C. J. Sung, “Ignition Delay Study of Moist Syngas/Oxidizer and Hydrogen/Oxidizer Mixtures using a Rapid Compression Machine,” Forty-Ninth Aerospace Sciences Meeting, AIAA Paper No. 2011-91 (2011).
  112. Y. Zhang, K. Kumar, and C. J. Sung, “Autoignition of Binary Fuel Blends of n-Butanol and n-Heptane in a Rapid Compression Machine,” Forty-Ninth Aerospace Sciences Meeting, AIAA Paper No. 2011-92 (2011).
  113. X. Hui, A. K. Das, K. Kumar, and C. J. Sung, “Laminar Flame Speeds and Extinction Stretch Rates of Selected Aromatic Hydrocarbons,” Forty-Ninth Aerospace Sciences Meeting, AIAA Paper No. 2011-241 (2011).
  114. K. Kumar, X. Hui, A. K. Das, and C. J. Sung, “Autoignition, Flame Propagation, and Extinction of Binary Fuel Blends of n-Decane/Ethylene and n-Decane/Methane” Forty-Ninth Aerospace Sciences Meeting, AIAA Paper No. 2011-315 (2011).
  115. B. W. Weber, K. Kumar, and C. J. Sung, “Autoignition of Butanol Isomers at Low to Intermediate Temperature and Elevated Pressure,” Forty-Ninth Aerospace Sciences Meeting, AIAA Paper No. 2011-316 (2011).
  116. K. E. Niemeyer and C. J. Sung, “DRGEP-based Mechanism Reduction Strategies: Graph Search Algorithms and Skeletal Primary Reference Fuel Mechanisms,” Forty-Ninth Aerospace Sciences Meeting, AIAA Paper No. 2011-508 (2011).
  117. K. B. Brady, C. J. Sung, and J. S. T’ien, “Catalytic Ignition of Hydrogen Leaks within Enclosed Spaces,” Seventh Joint Meeting of the U.S. Sections of the Combustion Institute, Atlanta, GA, 2011.
  118. B. W. Weber and C. J. Sung, “A Rapid Compression Study of the Butanol Isomers at Elevated Pressure,”Seventh Joint Meeting of the U.S. Sections of the Combustion Institute, Atlanta, GA, 2011.
  119. K. E. Niemeyer and C. J. Sung, “Mechanism Reduction Strategies for Multicomponent Gasoline Surrogate Fuels,” Seventh Joint Meeting of the U.S. Sections of the Combustion Institute, Atlanta, GA, 2011.
  120. S. Dooley, S. H. Won, J. Heyne, Y. Ju, F. L. Dryer, K. Kumar, C. J. Sung, H. Wang, M. A. Oehlschlaeger, T. A. Litzinger, and R. J. Santoro, “The Formulation of Surrogate Fuels to Emulate the Combustion Behavior of Real Jet Aviation Fuels,” Seventh Joint Meeting of the U.S. Sections of the Combustion Institute, Atlanta, GA, 2011.
  121. Y. X. Xin, C. J. Sung, and C. K. Law, “A Mechanistic Study of Soret Diffusion in n-Heptane/Air Flames,” Seventh Joint Meeting of the U.S. Sections of the Combustion Institute, Atlanta, GA, 2011.
  122. X. Xue, W. Gao, Q. H. Xu, Y. Z. Lin, and C. J. Sung, Injection of Subcritical and Supercritical Aviation Kerosene into a High-Temperature and High-Pressure Crossflow,” ASME Turbo Expo 2011, ASME Paper No. GT2011-45773 (2011).
  123. Z. B. Fu, J. B. Li, Y. Z. Lin, and C. J. Sung, “Experimental Investigation on Ignition Performance of LESS Combustor,” ASME Turbo Expo 2011, ASME Paper No. GT2011-45786 (2011).
  124. C. Zhang, J. Zhu, Y. X. Yuan, Q. H. Xu, Y. Z. Lin, and C. J. Sung, “Experimental Characterization of Fuel-Air Mixing in a Multi-Hole Tube,” ASME Turbo Expo 2011, ASME Paper No. GT2011-45793 (2011).
  125. M. R. Harper, W. H. Green, K. M. Van Geem, B. W. Weber, C. J. Sung, I. Stranic, D. F. Davidson, R. K. Hanson, “Combustion of the Butanol Isomers: Reaction Pathways at Elevated Pressures from Low-to-High Temperatures,” Seventh International Conference on Chemical Kinetics, Cambridge, MA, 2011.
  126. B. W. Weber and C. J. Sung, “Autoignition of Butanol Isomers at High Pressure in a Rapid Compression Machine,” Seventh International Conference on Chemical Kinetics, Cambridge, MA, 2011.
  127. B. W. Weber and C. J. Sung, “Comparative Investigation of the High Pressure Autoignition of the Butanol Isomers,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Connecticut, CT, 2011.
  128. K. Kumar and C. J. Sung, “Autoignition of Selected Alkyl-Benzenes in a Rapid Compression Machine,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Connecticut, CT, 2011.
  129. M. Uddi, A. K. Das, G. Kukkadapu,and C. J. Sung, “H2O Number Density and Temperature Measurements in a Rapid Compression Machine using Mid-IR Absorption Spectroscopy,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Connecticut, CT, 2011.
  130. G. Kukkadapu, K. Kumar, C. J. Sung, M. Mehl, and W. J. Pitz, “Experimental and Surrogate Modeling Study of Gasoline Ignition in a Rapid Compression Machine,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Connecticut, CT, 2011.
  131. K. B. Brady, C. J. Sung, and J. S. T’ien, “Catalytic Ignition of Enclosed Hydrogen Leaks,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Connecticut, CT, 2011.
  132. K. E. Niemeyer, C. J. Sung, C. G. Fotache, “Turbulence-Chemistry Closure Method using Graphics Processing Units: a Preliminary Test,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Connecticut, CT, 2011.
  133. Y. X. Xin, C. J. Sung, and C. K. Law, “A Comprehensive Evaluation of Soret Diffusion in Heptane–Air Flames,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, University of Connecticut, CT, 2011.
  134. M. Mehl, G. Kukkadapu, K. Kumar, W. J. Pitz,and C. J. Sung, “Gasoline Surrogate Modeling of Gasoline Ignition in a Rapid Compression Machine and Comparison to Experiments,” Fall Technical Meeting of the Western States Section of the Combustion Institute, University of California, Riverside, CA, 2011.
  135. Y. Lin, Y. Z. Lin, C. J. Sung, C. Zhang, G. Z. Liu, and Q. H. Xu, “Evaluation of Combustion Performance of a Coal-Derived Synthetic Jet Fuel,” ASME Turbo Expo 2012, ASME Paper No. GT2012-68604 (2012).
  136. Q. Yang, Y. Z. Lin, C. Zhang, C. J. Sung, and Q. H. Xu, “Cooling Effectiveness of Impingement/Effusion Cooling with and without Turbulence Promoter Ribs,” ASME Turbo Expo 2012, ASME Paper No. GT2012-69209 (2012).
  137. L. Li, Y. Z. Lin, X. Xue, W. Gao, and C. J. Sung, “Injection of Liquid Kerosene into a High-Pressure Subsonic Air Crossflow from Normal Temperature to Elevated Temperature,” ASME Turbo Expo 2012, ASME Paper No. GT2012-69241 (2012).
  138. K. E. Niemeyer and C. J. Sung, “Recent Progress and Challenges in Exploiting Graphics Processors for Aeropropulsion Simulations,” Fourth International Symposium on Jet Propulsion and Power Engineering, Xi’an, China, 2012.
  139. K. E. Niemeyer and C. J. Sung, “Accelerating Reactive-Flow Simulations using Graphics Processing Units,” Fifty-First Aerospace Sciences Meeting, AIAA Paper No. 2013-0371 (2013).
  140. B. W. Weber, S. S. Merchant, C. J. Sung, and W. H. Green, “An Autoignition Study of iso-Butanol: Experiments and Modeling,” Eighth Joint Meeting of the U.S. Sections of the Combustion Institute, Park City, UT, 2013.
  141. S. M. Sarathy, S. Park, W. Wang, P. Veloo, A. C. Davis, C. Togbe, B. W. Weber, C. K. Westbrook, O. Park, G. Dayma, Z. Luo, M. A. Oehlschlaeger, F. N. Egolfopoulos, T. Lu, W. J. Pitz, C. J. Sung, and P. Dagaut, “A Comprehensive Experimental and Modeling Study of iso-Pentanol Combustion,” Eighth Joint Meeting of the U.S. Sections of the Combustion Institute, Park City, UT, 2013.
  142. B. W. Weber, W. J. Pitz, C. J. Sung, M. Mehl, E. J. Silke, and A. C. Davis, “Experiments and Modeling of the Autoignition of Methyl-Cyclohexane at High Pressure,” Eighth Joint Meeting of the U.S. Sections of the Combustion Institute, Park City, UT, 2013.
  143. K. E. Niemeyer and C. J. Sung, “Reduced Mechanisms for Gasoline Surrogates valid at Engine Conditions,” Eighth Joint Meeting of the U.S. Sections of the Combustion Institute, Park City, UT, 2013.
  144. S. M. Sarathy, G. Kukkadapu, W. Wang, K. Qurashi, S. Y. Yang, M. Mehl, C. J. Sung, M. A. Oehlschlaeger, W. J. Pitz, and S. H. Chung, “Ignition of FACE Gasoline and Primary Reference Fuels,” Eighth Mediterranean Combustion Symposium, Çeşme, Izmir, Turkey, 2013.
  145. P. Singh, X. Hui, and C. J. Sung, “Soot formation in Butanol Isomer Non-Premixed Flames,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, Clemson University, Greenville, SC, 2013.
  146. G. Kukkadapu, C. J. Sung, and A. K. Das, “Auto-Ignition of iso-Octane at Elevated Pressures in a Rapid Compression Machine,” Fall Technical Meeting of the Eastern States Section of the Combustion Institute, Clemson University, Greenville, SC, 2013.
  147. X. Xue, Y. Z. Lin, C. Zhang, Y. Tian, and C. J. Sung, “Experimental Study on NOx and CO Emissions of Aviation Kerosene and Coal-to-Liquid Synthetic Aviation Fuel in a Jet Stirred Combustion Reactor,” ASME Turbo Expo 2014, ASME Paper No. GT2014-26003 (2014).
  148. G. Kukkadapu , B. W. Weber, and C. J. Sung, “Autoignition Study of Tetralin in a Rapid Compression Machine at Elevated Pressures and Low-to-Intermediate Temperatures,” Ninth Joint Meeting of the U.S. Sections of the Combustion Institute, Cincinnati, OH, 2015.
  149. G. Kukkadapu , S. M. Sarathy, and C. J. Sung, “Experimental and Modeling Studies of FACE Gasolines: Effect of Octane Sensitivity on Autoignition in a Rapid Compression Machine,” Ninth Joint Meeting of the U.S. Sections of the Combustion Institute, Cincinnati, OH, 2015.
  150. K. Kumar, M. Mehl, W. J. Pitz, and C. J. Sung, “An Experimental and Kinetic Modeling Study for Autoignition of 1, 2, 4-Trimethylbenzene,” Ninth Joint Meeting of the U.S. Sections of the Combustion Institute, Cincinnati, OH, 2015.
  151. K. B. Brady, X. Hui, and C. J. Sung “Non-Premixed Counterflow Ignition of Butanol Isomers at Elevated Pressures,” Ninth Joint Meeting of the U.S. Sections of the Combustion Institute, Cincinnati, OH, 2015.
  152. K. Kumar, J. A. Bunnell, B. W. Weber, and C. J. Sung, “Autoignition of Methyl-Propanoate and a Comparison with its Selected Ester Homologs,” Ninth Joint Meeting of the U.S. Sections of the Combustion Institute, Cincinnati, OH, 2015.
  153. E. Dames, B. W. Weber, A. Rosen, C. W. Gao, C. J. Sung, and W. H. Green, “Towards a Comprehensive DME/Propane Blended Combustion Kinetic Model,” Ninth Joint Meeting of the U.S. Sections of the Combustion Institute, Cincinnati, OH, 2015.
  154. Samimi Abianeh, M. A. Oehlschlaeger, and C. J. Sung, “Turbulent Spray Combustion Simulations based on a New n-Dodecane Skeletal Mechanism,”ILASS-Americas Twenty-Seventh Annual Conference on Liquid Atomization and Spray Systems, Raleigh, NC, 2015.
  155. C. Zhang, P. Zou, B. Wang, X. Xue, Y. Z. Lin, and C. J. Sung, “Comparison of Flame Dynamics at Stable and Near-LBO Conditions for Swirl-Stabilized Kerosene Spray Combustion,”ASME Turbo Expo 2015, ASME Paper No. GT2015-42596 (2015).
  156. K. E. Niemeyer, N. J. Curtis, and C. J. Sung, “pyJac: Analytical Jacobian Generator for Chemical Kinetics,”Fall Technical Meeting of the Western States Section of the Combustion Institute, Brigham Young University, Provo, UT, 2015.
  157. X. Ren, K. B. Brady, C. J. Sung, H. C. Mongia, and P. Lee, “Impact of Air Swirler Rotation Direction on the Flow Field and Performance of a Lean Direct Injection Concept Fuel Injector,”Spring Technical Meeting of the Eastern States Section of the Combustion Institute, Princeton University, Princeton, NJ, 2016.
  158. X. Han, X. Hui, H. Qin, Y. Z. Lin, M. Zhang, and C. J. Sung, “Effect of the Diffuser on the Inlet Acoustic Boundary in Combustion-Acoustic Coupled Oscillation,”ASME Turbo Expo 2016, ASME Paper No. GT2016-57046 (2016).
  159. B. W. Weber and C. J. Sung, “UConnRCMPy: Python-based data analysis for Rapid Compression Machines,”SciPy 2016Scientific Computing with Python, Austin, TX, 2016.
  160. X. Ren, X. Xue, C. J. Sung, K. B. Brady, H. C. Mongia, and P. Lee, “The Impact of Venturi Geometry on Reacting Flows in a Swirl-Venturi Lean Direct Injection Airblast Injector,”Fifty-Second AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Paper No. 2016-4650 (2016).
  161. G. Kukkadapu, S.W. Wagnon, M. Mehl, K. Zhang, C. K. Westbrook, W. J. Pitz, M. J. Mcnenly, S. M. Sarathy, A. Rodriguez, O. Herbinet, F. Battin-Leclerc, and C. J. Sung, “An Updated Comprehensive Chemical Kinetic Model of C8-C20n-Alkanes,” Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  162. M. Wang, G. Kukkadapu, K. Zhang, W.J. Pitz, and C. J. Sung, “Autoignition oftrans-Decalin, a Diesel Surrogate Compound: Rapid Compression Machine Experiments and Chemical Kinetic Modeling,” Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  163. B. W. Weber, J. Bunnell, K. Kumar, and C. J. Sung, “Autoignition of Methyl Valerate at Low to Intermediate Temperatures and Elevated Pressures in a Rapid Compression Machine,”Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  164. X. Xue, C. J. Sung, and H. Wang, “Effect of Distillate Fraction of Real Jet Fuel on Sooting Propensity – Part 2: Soot Formation in Nonpremixed Counterflow Flames,”Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  165. X. Xue, X. Hui, P. Singh, and C. J. Sung,Soot Formation of Conventional and Alternative Jet Fuels in Counterflow Nonpremixed Flames,” Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  166. N. J. Curtis and C. J. Sung, “SIMD-Vectorized Chemical Source Term Evaluation,”Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  167. B. W. Weber and C. J. Sung,“UConnRCMPy: Python-based Data Analysis for Rapid Compression Machines,” Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  168. H. Wang, B. W. Weber, R. Fang, and C. J. Sung, “High-Pressure Autoignition of Binary Blends of Methanol and Dimethyl Ether,”Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  169. Q. Xu, R. Leathers, D. Savage, K. Kumar, and C. J. Sung, “Influence of Blendingn-Butanol with iso-Octane and n-Heptane on Ignition Delay Times in a Fuel Ignition Tester,” Tenth Joint Meeting of the U.S. Sections of the Combustion Institute, College Park, MD, 2017.
  170. W. Qian, X. Hui, C. Zhang, Q. Xu, Y. Z. Lin, and C. J. Sung, “A Numerical Study of the Internal Flow in a Pressure Swirl Atomizer,”ASME Turbo Expo 2017, ASME Paper No. GT2017-64149 (2017).
  171. X. Han, X. Hui, C. Zhang, Y. Z. Lin, H. Pei, and C. J. Sung, “Combustion Instabilities in a Lean Premixed Pre-Vaporized Combustor at High-Pressure High-Temperature,”ASME Turbo Expo 2017, ASME Paper No. GT2017-65190 (2017).

Back to Top